Table of Contents
Advertisement
• During charging or discharging, the camcorder
cannot be operated.
• Charging and discharging is not possible if the
wrong type of battery is used.
• When charging the battery pack for the first time
or after a long storage period, the CHARGE lamp
^
may not light. Remove the battery pack from
the camcorder, then try charging again.
• If a fully-charged battery's operation time remains
extremely short, the battery is worn out. Please
purchase a new one.
• Perform charging where the temperature is
between 10°C and 35°C (50°F and 95°F). 20°C to
25°C (68°F to 77°F) is the ideal temperature range
for charging. If the environment is too cold,
charging may be incomplete.
• Charging time varies according to the ambient
temperature and the status of the battery pack.
• Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
• The following operation stops charging or
discharging:
0
• Set the Power Switch
• Disconnect the AC Adapter from the camcorder.
• Unplug the AC Adapter from the AC outlet.
• Detach the battery from the camcorder.
• Using the optional AA-V15 AC Power Adapter/
Charger, you can charge the BN-V11U/V12U/
V20U/V400U battery pack without the camcorder.
However, it cannot be used as an AC adapter.
• To avoid interference with reception, do not use
the AC Adapter near a radio.
• Recording time is reduced significantly when
Zoom or Record-Standby mode is engaged
repeatedly or the LCD monitor is used repeatedly.
• Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
GR-AXM541U_EN
to "
", "
" or "
".
7
7
Date/Time Settings
0
1) Set the Power Switch
2) Press the MENU Wheel
Screen appears.
3) Rotate the MENU Wheel
4
"
TO SYSTEM MENU" and press it to display
SYSTEM MENU. Rotate the MENU Wheel
select "
4
NEXT" and press it to display the next
page.
4) Rotate the MENU Wheel
TIME" and press it. The DATE/TIME Menu
appears.
5) To set "YEAR", "MONTH", "DAY" or "TIME"
(hour/minute), rotate the MENU Wheel
select the desired item, and press it. When the
setting begins blinking, rotate the MENU Wheel
1
until the correct setting appears and then
press it. The setting stops blinking.
6) When none of these settings ("YEAR",
"MONTH", "DAY", "TIME") blinks, rotate the
1
MENU Wheel
to select "EXIT", and press it.
The Menu Screen reappears with the highlight
bar on "
4
RETURN".
7) Press the MENU Wheel
Screen.
• To display the date and time in the camcorder's
display and on a connected TV, see DATE/TIME
DISP. (
pg. 19) in CAMERA MENU.
• The date/time cannot be stored in memory if the
built-in clock battery runs out. Consult an
authorized JVC dealer for replacement, or set the
date/time as necessary before you start shooting.
1
0
DATE / T I
M
E
Y
E
A
R
2
0
0
2
M
O
N
T
H
J
U
N
D
A
Y
2
8
:
T
I
M
E
P
M
8
2
0
E
X
I
T
02.4.22, 6:00 PM
to "
".
1
in. The Menu
1
to select
1
to
1
to select "DATE/
1
to
1
in to close the Menu
12-hour indication
with AM or PM
Advertisement
Table of Contents
