System Setting - carNAVi S 500 Hardware Manual

4 . 6 S ystem S etting
Click "System" icon on the main interface to set your system, including volume, power,
Backlight, Date time,language, system information.
4.6.1 Volume Setting
Click "Volume"icon to enter the volume setting interface
4.6.2 Power Setting
Click "Power" icon to enter the power setting interface. The user can check the
status bar to know the power, at the same time, also can click
time for automatically power off.
4.6.3 Backlight Setting
Click "Backlight" to enter Backlight setting interface. The user can adjust the
，or can click
backlight by and
screen power off.
-13-
or to set the
or to set the time for automatically
4.6.4 Date Time Setting
Click "Date Time" to enter Date Time setting interface. Status bar will show
the current separately time, date and time zone.
Separately click "time", "date", "time zone" to set up the time, date and time zone.
Through the GPS signals, the time setting refreshes the current time automatically, it
means that the time will temporarily return to the factory setting time after the system
reset. As soon as the GPS begins to navigate, the time will renew to the standard time.
Please note that the time setting should be compatible with the local time.
4.6.5 Language Setting
Click "Language" icon to set the language you need.
Support multi-country languages : English、French、German、Spanlish、Italian、Dutch、
Russian、Chinese、Korean and so on
4.6.6 System Information
Click "System" icon to view the detailed system information.
1. Click "Calibration"icon at the left corner of information box to adjust the touch screen
. Choose to move the cursor through middle, left, right, up,down steps.
of cursor until the calibration is successful.
2. Click "Factory Reset"icon at the right corner of information box, the system will
automatically return to the factory setting.
3. Click "GPS Reset" icon in the middle of information box, the system will automatically
clear up the Signal-to-Noise data received.
Repeat click the middle
-14-