Table of Contents
Advertisement
Step 6
Using the illustrations as a reference,
choose the correct Interface Cable from
the Interface Module IM-CHR1 package.
Part #152129 for 1998-2001 vehicles
or Part #156794 for 2002-2005 vehicles.
This Interface Cable has a yellow wire
as well. The yellow wire needs 12 volts
accessory power just like the blue with
white stripe wire on the Interface Cable
from the iCruze package. You may join
the two wires together and connect
to the accessory power source you found
in Step 4.
Step 7
One end of the Interface Cable
from the Interface Module IM-CHR1
package goes into the Interface
Module CHR1 and the other goes
into the back of the factory stereo.
Step 6
Yellow Wire
Connects
to 12 volt
Accessory
152129
-or-
Step 6
Yellow Wire
Connects
to 12 volt
Accessory
156794
Step 7
Back of Stereo
Connected
to 12 volt
Accessory
152129
-or-
Step 7
Back of Stereo
Connected
to 12 volt
Accessory
156794
Though there is only one way to push the connectors in,
don't force them. Double check that you have the correct
Interface Cable for your installation by reviewing the in-store
iCruze Factory•Linx Selection Guide, by visiting iPodiCruze.com
or by calling iCruze Customer Support at 415-840-2000,
(Monday through Friday, 9am-5pm PT).
INSTALLATION COMPLETE
Refer back to the installation guide that came with iCruze
to complete your iCruze installation and for more details
on using iCruze functions and features.
OPERATION NOTES
10 up and 10 down using FF and RW buttons not supported.
If you ever lose the ability to control the iPod from the factory
stereo, cycle the ignition key off and back on. After cycling
the ignition key, it will be necessary to reselect the iPod
as a source. The iPod will begin play from Playlist 1, track 1 after
an ignition key cycle.
CUSTOMER SUPPORT
If you have questions, please try iPodiCruze.com for the latest
updates to manuals, products and more. You can also call
1-415-840-2000 (9am–5pm Monday through Friday PT)
for assistance.
Advertisement
Table of Contents
