Picture Settings - ProScan PLED 2243B User Manual

Picture Settings

When Picture Mode is set to User, the following settings can be manually adjusted.
Press MODE shortcut button on the remote control to select picture mode directly.
Adjusting the values
Highlight the item and Press to select. Movie/Dynamic/Standard/User
Brightness/Contrast/Color/Tint/Sharpness
Highlight the item and press , and a process bar appears, then press
the value. Tint is available when analog TV or NTSC-system AV or Svideo.
Press MENU to back the Picture Settings menu.
to adjust
16
PC Settings
PC Settings Menu is aviliable only in PC VGA or DVI mode. When DVI signal input, only
Horizontal Position and Vertical Position can be adjusted.
Press to highlight one of the following options, then press ENTER to select it.
Auto Adjust Automatically adjust Clock, Phase, H-Position and V-Position settings.
In order to get a good result, you should open a"filling the screen"picture before
executing Auto Adjust.
Horizontal Position Shift the screen slightly to left or right.
Vertical Position Shift the screen slightly up or down.
Clock Adjust the VGA picture signal sampling clock rate.
Phase Adjust the VGA picture signal sampling phase. It maybe affect the definition .
Wrong value maybe result the interference.
Reset Reset the parameters of current menu to default value.
17