Connecting Your Beogram 1200; Operation; Mains Voltage; Speed Selector - Bang & Olufsen Beogram 1200 Operating Instructions Manual

Stereo record player with automatic pickup arm control
Table of Contents

Advertisement

CONNECTING YOUR BEOGRAM 1200
Your BEOGRAM 1200 has a cable fitted with a DIN plug. This
plug should be inserted in the matching socket on your radio re
ceiver or amplifjer.
Turn the lock (9) upwards, thereby releasing the pickup arm from
the rest. Vour BEOGRAM 1200 will flow be ready for operatiofl.
You fleed flot use the lock (9) in everyday operatiofl; ofily whefl
you want to move or dispatch your BEOGRAM 1200 should you
turfi the lock dowfl over the pickup arm.
SPEED SELECTOR
Set the speed selector (3) to the desired speed. 45 or 33 r. p. m.
Returfi the selector to the 0 position after use; this will relieve
the pressure
Ofi
the rubber wheels of the motor.
RECORD SIZE
Set the switch (6) for the size of record you wish to play
30,
25, or 17 cms (12, 10, or 63/4
ifl.)
and thefl put a record of
that size
Ofi
the turfitable.
NOTE: Do flot set the selector to 25 whefl you put cm a 17 cm
record. If you do, the stylus will be lowered on to the rubber
coatiflg. resulting
ifl
damage.
MAINS VOLTAGE
As supplied from the factory, the BEOGRAM 1200, Type 5214,
is switched for operation on 220 volts, 50 Hz, and may be operat
ad on mains voltages between 190 and 265 volts.
It cafl be switched to 110 volts, 50 Hz, by rotating a small disc
on the bottom plate so that the arrow marked VOLTS points di
rectly at 110. The mains-voltage range will now be 105
-
130 volts.
STARTING
Depress the starter buttofl (7). The pickup will now automatic
ally move
ifl
and be lowered into the first groove on the record.
NOTE: Do flot depress the buttofl (7) until you have released the
pickup arm from the rest by turning the lock (9).
The automatic mechanism will always lower the pickup stylus
iflto the first groove of the record.
If you wish to start playing
ifl
some later section, you may ~iiove
the pickup arm, using the fiflger grip (8),
ifl
above the desired
place on the record before depressiflg the starter button.
AUTOMATIC STOP
MAN UAL STOP
When a record has fiflished, the pickup will automatically lift
from the record, and the turntable stops. You may then move
the pickup out to the arm rest with the finger grip (8) and put
on another record.
If you wish to stop playing a record before it has finished. de-
press buttofl (7). The pickup will then rise and may be brought.
out to the arm rest, using the finger grip (8).
OPERATION
10
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents