Advertisement
Specifications
Operation
Note: This Float Charger is intended only to keep a fully charged battery from losing its charge.
It will not work to charge a battery that is discharged or damaged.
Connection
1. Place Float Charger within 3 feet of battery.
Unplug the AC Adapter.
2. Connect Red clip to positive (+) terminal of battery.
3. Connect Black clip to negative (–) terminal of battery.
After Use
1. Unplug the AC Adapter.
2. Remove the Black clip, then the
Red clip from the battery.
Note: Replacement parts are not available for this item.
Item 42292
Input
Rated Output
Maximum Output
Battery Capacity
Cable Length
For technical questions, please call 1-888-866-5797.
120VAC, 60Hz, 14W
12 VDC
13.2 VDC
5 – 125 Ah
53"
4. The LED will not stay lit if not hooked up with
the correct polarity to the battery. Correct the
connections before plugging the battery charger in.
5. Plug AC Adapter into electrical outlet.
6. Use the included 2 rubber washers and
2 cross head screws to mount the Housing (F).
Do not overtighten.
3. Wipe the Charger with a clean, dry cloth
and store out of reach of children.
Page 3
Advertisement
