Download Print this page
Superior Signal SAFE-T-LOCK Installation Instructions

Superior Signal SAFE-T-LOCK Installation Instructions

Programmable code switch
Hide thumbs Also See for SAFE-T-LOCK:

Advertisement

Quick Links

TEMPLATE
0.156" / 4mm
0.625" / 16mm
0.156" / 4mm
16355 SOUTH LONE ELM ROAD
OLATHE, KANSAS 66062 • USA
TOLL FREE: 800-447-3693 • PHONE: 913-780-1440 • FAX: 913-780-1427
www.superiorsignals.com
Drill holes for #8 screw
(hardware not provided)
Unit to be installed by qualified technition.
• The Safe-T-Lock™ / Safe-T-Lock™ Plus is a sealed unit.
Removing or tampering with the epoxy encapsulant will void the warranty.
• Units damaged due to overload, abuse or incorrect installation will not be accepted
in warranty.
• Units have no serviceable parts.
This product is warranted against defects in materials or workmanship for one year
from the date of purchase. Should service be required, the customer should return the
from the date of purchase.
product for warranty consideration. Shipping will be prepaid via ground transportation.
All products requiring warranty service shall be returned within one year from the date of
purchase. Exclusions from this warranty are the finish, and damage caused by improper
purchase.
installation or use.
The manufacturer assumes no liability for costs incurred to remove or reinstall the
product, or for lost revenues due to equipment downtime.
This warranty gives you specific legal rights. You may also have other rights which vary
from state to state and country to country.
EL510-1002
PROGRAMMABLE CODE SWITCH
INSTALLATION INSTRUCTIONS
INSTALLATION
Read and Save
Unit to be installed by qualified technition.
WARRANTY
INSTRUCTIONS
for one year
within one year from the date of

Advertisement

loading
Need help?

Need help?

Do you have a question about the SAFE-T-LOCK and is the answer not in the manual?

Questions and answers

Summary of Contents for Superior Signal SAFE-T-LOCK

  • Page 1 Unit to be installed by qualified technition. WARRANTY 0.156" / 4mm • The Safe-T-Lock™ / Safe-T-Lock™ Plus is a sealed unit. Removing or tampering with the epoxy encapsulant will void the warranty. • Units damaged due to overload, abuse or incorrect installation will not be accepted in warranty.
  • Page 2 BATTERY NEGATIVE BATTERY POSITIVE INSTALLATION Fuse 10A SAFE 1. Mount the Safe-T-Lock™ / Safe-T-Lock™ Plus Programmable Code Switch with LOCK 2, #8 screws. (not provided) Recommend mounting in a easily accessible location, such as on the dash panel. (BAT) (ION)

This manual is also suitable for:

Safe-t-lock plus