Connecting The Device To Vehicle Power - Garmin nuvi 2200 Owner's Manual

Getting Started
➋
◦ There is a mini-USB
connector
the mount.
Connecting the Device
to Vehicle Power
You should charge your device before
using it on battery power.
1. Plug the vehicle power cable into
the USB connector on the device
or mount (page
2. Plug the vehicle power cable into
a power outlet in your vehicle.
4
on the back of
➌
➌
3).
3. If you are using a traffic receiver
in Europe, connect the external
antenna to the traffic receiver and
secure it to the windshield using
the suction cups.
After the device is connected to
vehicle power, the following should
occur:
• The device turns on.
• The device starts to acquire
satellite signals. When at least
one of the
your device has acquired satellite
signals.
NOTE: The device may need a
clear view of the sky to acquire
satellite signals.
• The device charges as you drive.
The icon in the status bar
indicates the status of the internal
battery.
nüvi 2200/2300 Series Owner's Manual
bars is green,