GEM PK5 Owner's Manual page 106

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
If you do not connect the serial port, set this parameter to OFF (default).
Use the DIAL or the + and – buttons of the Sound selection keypad to select the required setting (PK7
only).
- TV=PAL: enables the video standard according to the television used.
You can choose between PAL (Europe) or NTSC (U.S.A.).
- InitALL: this parameter allows you to initialize your PK7/PK5 in order to restore the default (factory-set)
conditions.
You can also restore a portion of the original memory by initializing the Performances (Pfm), the Sequencer
(Seq), or, for PK7 only, the Samples (Smp).
- Midi: this function consists of 7 parameters which relate to the MIDI functions.
To access the CHANNEL and LOCAL parameters, press ENTER.
All the remaining parameters are selected with the + and – buttons of the Sound selection keypad, before
selecting the CHANNEL and/or LOCAL parameters.
- Channel: use this parameter to assign a MIDI channel to each track as required. To activate this param-
eter (which relates to the individual tracks), press ENTER.
The 3 digit display shows the number of the track (e.g. 01 = track n. 1). Select the tracks with the + or –
buttons.
Rotate the DIAL to assign a different MIDI channel to the track.
After configuring all the tracks, the display shows the Common track and relative MIDI channel.
To gain access quickly to each track, you can also press the corresponding function button.
- Local: the LOCAL ON/OFF function, the PK7/PK5 controls the sound generator of each section.
It is possible to independently disconnect each track from the internal sound engine.
Press ENTER. The 8 digit display shows the number of the track. Rotate the DIAL to change the ON/OFF
status of the parameter and select the tracks with the + or – buttons.
To gain quick access to each track, you can also press the corresponding function button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
100 User Guide