Play On The Keyboard And Change The Sounds - GEM PK5 Owner's Manual

Play on the keyboard and change the sounds

1. Play on the keyboard.
You will hear the "Piano" sound play across the full keyboard extension.
The group of Keyboard Activators (Upper 2, Upper 1, Lower) shows Upper 1 selected (LED on), indicating
that the UPPER 1 keyboard section is active to play.
The Upper 2 and Lower keyboard sections are also enabled for activation.
2. Press UPPER 2.
A second sound is introduced, layered with the first.
Pressing a single note on the keyboard plays two sounds simultaneously.
3. Press LOWER and play with both hands.
A third sound is introduced and the keyboard is now divided with a Split Point at note B3. The LOWER
keyboard plays over the range C2 - B3. The UPPER 1 and UPPER 2 sections are assigned to the range
C4 - C7. This keyboard mode is called SPLIT mode.
4. Adjust the overall volume.
Use the VOLUME sliding control (slider) to adjust the general volume of the instrument.
A comfortable level is about two thirds of the maximum course of the slider.
PIANO 1
PIANO 1
STRINGS
PIANO 1
SLO STR
STRINGS
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Get started 13