Advertisement
3. Place the nasal cannula in your nose and breathe normally. The unit detects
when you begin to take a breath and delivers oxygen in PULSE-WAVE™ doses.
4. To recharge the unit and/or External Battery*, you can use the AC or DC
Adapter/Charger. Connect the adapter to the connector port on the unit
and the charger to a source of electricity.
5. To turn the unit off, press and hold the Power Button for 2 seconds until
the green Power LED light and the unit shut off. The internal fans may
continue to operate for an additional period of time until the temperature
inside the unit is sufficiently cool.
Pulse Setting
(LPMeq)
Internal Battery
Run Time (hours) †
External Battery
Run Time (hours) †
* If an External Battery was purchased, please refer to the Operator's Manual for
detailed charging and operating instructions.
† Based on breaths per minute.
Battery Life Timetable
Run Time (@ 15 breaths per minute)
1
2
12
6
3
3
3
5
2
7
Advertisement
