Advertisement
Operating Your LifeChoice Activox POC
Follow the steps below to power on and operate your unit.
6
1. Press the Power Button once to
turn the unit on. You will hear a
beep and see the Power, Auto Mode
Active-High and Pulse Setting of
1 LED lights illuminate solid green.
Allow 30 seconds for the unit to fully
power on.
CAUTION:
DO NOT place the
cannula in your nose until the unit
is fully powered on. Breathing
through the cannula during
start-up will prevent the system
from powering on.
2. Press the Pulse Setting (1, 2 or
3 LPMeq) prescribed by your
doctor. The green LED above the
selected setting will illuminate and
flash each time a breath is detected.
Advertisement
