Advertisement
Do you have a question about the IL-4 and is the answer not in the manual?
I did all the things suggested but the finished sheet did not come out the back of the machine
If the Ibico IL-4 machine does not output the finished sheet, follow these steps:1. Turn Off and Unplug: Switch off the machine and unplug it to ensure safety before inspecting.2. Check for Paper Jam: Open the machine and look for any jammed or stuck sheets. Gently remove any obstructions.3. Inspect Rollers: Ensure the rollers are clean and free of debris. Use a soft, lint-free cloth to clean if needed.4. Check Pouches: Make sure you are using the correct type and size of laminating pouch for the document.5. Warm-Up Time: Confirm the machine has fully warmed up before use. The ready light should be on.6. Insert Properly: Ensure the document and pouch are aligned correctly and inserted straight into the machine.7. Avoid Overloading: Do not insert overly thick materials or multiple sheets at once.8. Test Again: After checking and correcting issues, plug in the machine, turn it on, wait for it to warm up, and try laminating again.If the problem continues, the machine may need professional servicing.
This answer is automatically generated
Need help?
Do you have a question about the IL-4 and is the answer not in the manual?
Questions and answers
I did all the things suggested but the finished sheet did not come out the back of the machine
If the Ibico IL-4 machine does not output the finished sheet, follow these steps:
1. Turn Off and Unplug: Switch off the machine and unplug it to ensure safety before inspecting.
2. Check for Paper Jam: Open the machine and look for any jammed or stuck sheets. Gently remove any obstructions.
3. Inspect Rollers: Ensure the rollers are clean and free of debris. Use a soft, lint-free cloth to clean if needed.
4. Check Pouches: Make sure you are using the correct type and size of laminating pouch for the document.
5. Warm-Up Time: Confirm the machine has fully warmed up before use. The ready light should be on.
6. Insert Properly: Ensure the document and pouch are aligned correctly and inserted straight into the machine.
7. Avoid Overloading: Do not insert overly thick materials or multiple sheets at once.
8. Test Again: After checking and correcting issues, plug in the machine, turn it on, wait for it to warm up, and try laminating again.
If the problem continues, the machine may need professional servicing.
This answer is automatically generated