ibico Patriot 12HR Operation Manual
  1. Manuals
  2. Brands
  3. ibico Manuals
  4. Laminator
  5. Patriot 12HR
  6. Operation manual

ibico Patriot 12HR Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

© 2002 IBICO. ALL RIGHTS RESERVED.
Do not duplicate without written permission.
Part number : 930 - 078A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Patriot 12HR and is the answer not in the manual?

Questions and answers

Related Manuals for ibico Patriot 12HR

Summary of Contents for ibico Patriot 12HR

  • Page 1 © 2002 IBICO. ALL RIGHTS RESERVED. Do not duplicate without written permission. Part number : 930 - 078A...
  • Page 2 The information in this publication is provided for reference and is believed to be accurate and complete. Ibico is not liable for errors in this publication or for incidental or consequential damage in connection with the furnishing or use of the information in this publication, including, but not limited to, any implied warranty of fitness or merchantability for any particular use.

  • Page 3: Table Of Contents

    Operations Manual Patriot 12HR, 25HC, 38HC Table of contents 1.0 Safety 1.1 Explanation of symbols 1.2 General Rules of safety 1.3 Labels Figure 1.3.1 Safety label placement 2.0 Warranty 2.1 Limited warranty 2.2 Exclusions to the warranty 3.0 Specifications 3.1 Film capacity 3.2 Film core...
  • Page 4 Patriot 12HR, 25HC, 38HC Operations Manual 7.0 Maintenance and troubleshooting 7.1 Cabinets, cover and stand 7.2 Clean the rollers 7.3 Troubleshooting Figure 7.3.1 Troubleshooting guide 8.0 Recommended spares 8.1 Spare parts list 9.0 Illustrated parts 9.1 Parts list 9.2 Patriot 12HR Illustrations...

  • Page 5: Safety

    1.2 General rules of safety Your safety, as well as the safety of others, is important to Ibico. This section contains important safety information which must be adhered to while operating, cleaning and performing basic maintenance in and around the machine.
  • Page 6 Patriot 12HR, 25HC, 38HC Operations Manual WARNING: Never use this machine for any other CAUTION: Avoid contact with the heat rollers during purpose than its intended design and function. operation or shortly after power has been removed from the laminator.

  • Page 7: Labels

    Operations Manual Patriot 12HR, 25HC, 38HC 1.3 Labels Sharp knife – The safety label below means that you could cut yourself Safety warning labels are placed at various locations on if you are not careful. the laminator. Do not remove any of these labels. They...

  • Page 8: Figure 1.3.1 Safety Label Placement

    Patriot 12HR, 25HC, 38HC Operations Manual Figure 1.3.1 Safety label placement CUIDADO CAUTION WARNUNG ATTENTION NAVAJA FILOSA. LAME COUPANTE. SHARP BLADE. SCHAREE KLINGE Keep hands and Hande und finger Mantener manos y Tenir mains et clothing away. ferhalten. dedos a distancia.

  • Page 9: Warranty

    PRIMARILY CAUSED BY ITS NEGLIGENCE), LOSS OF PROFIT OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT IBICO warrants the equipment to be free from defects in OF THE USE OR INABILITY TO USE THE material and workmanship for a period of 90 days for EQUIPMENT.
  • Page 10 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 2-2 © 2002 IBICO...

  • Page 11: Specifications

    Operations Manual Patriot 12HR, 25HC, 38HC 3.6 Electrical requirements 3.0 Specifications This section provides specific information regarding the laminator. Any specification not provided must be requested from Ibico. INFORMATION: Refer to the serial plate located on the rear of the laminator for specific electrical ratings applicable to the unit.
  • Page 12 Patriot 12HR, 25HC, 38HC Operations Manual Figure 3.5.1 Patriot 12HR 24 in. (61 cm) 12 in. (31 cm) 21 in. (53 cm) Figure 3.5.2 Patriot 25HC 35 in. (89 cm) 12 in. (31 cm) 21 in. (53 cm) Page 3-2...
  • Page 13 Operations Manual Patriot 12HR, 25HC, 38HC Figure 3.5.3 Patriot 38HC 51 in. (130 cm) 17 in. (43 cm) 21 in. (53 cm) © 2002 IBICO Page 3-3...
  • Page 14 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 3-4 © 2002 IBICO...

  • Page 15: Installation

    Avoid locating the laminator near sources of heat or cold. Avoid positioning the laminator in the direct path of Place the Patriot 12HR or 25HC laminator on a stable forced heated or cooling air. flat surface capable of supporting at least 95 lbs. (45kgs).

  • Page 16: Know Your Laminator

    This section will assist you in understanding what and Rear slitter where items are when referred to in the manual. For illustration purpose only, the Patriot 12HR is used. On/ Off Components are identical on the Patriot 25HC and 38HC...

  • Page 17: Operations

    Operations Manual Patriot 12HR, 25HC, 38HC (4) SAFETY SHIELD: Prevents entanglement, 5.0 Operation entrapment and inadvertent contact with the heat rollers. This section covers the components of the laminator, the control panel, feed table, supply shaft, film alignment and tension knobs.
  • Page 18 Patriot 12HR, 25HC, 38HC Operations Manual (8) HEAT ROLLERS: Silicone rubber coated steel (11) SUPPLY SHAFT: The supply shaft holds the film tubes. Used to heat the laminating film and compress the supply and the core adapters hold the rolls of film on the film to the items being laminated.
  • Page 19 Operations Manual Patriot 12HR, 25HC, 38HC (17) FILM TENSION KNOBS: Allows the operator to increase or decrease film web tension as necessary to reduce curl and wrinkles. Refer to Section 4.6 Adjusting film tension for more information on tension. CAUTION: Exercise extreme caution when working around or replacing the film cutter blade.

  • Page 20: Control Panel

    Patriot 12HR, 25HC, 38HC Operations Manual 5.2 Control panel (8) TEMP : When pressed, llows the operator to decrease the temperature, overriding the preset condition. Refer to Figure 4.2.1 Control panel : When pressed, llows the operator to (9) SPEED...

  • Page 21: Figure 5.2.1 Control Panel

    Operations Manual Patriot 12HR, 25HC, 38HC Figure 5.2.1 Control panel PRESET TEMP SPEED (10) (11) MEASURE (12) REVERSE (13) COLD (14) C / F STOP © 2002 IBICO Page 5-5...

  • Page 22: Feed Table

    Patriot 12HR, 25HC, 38HC Operations Manual 5.3 Feed table 5.4 Supply shaft To remove To remove Lift the safety shield to its full upright position. Slide the upper shaft to the right from the front operating position. Slide the feed table interlock latch to the right.

  • Page 23: Film Alignment

    Refer to Section 4.6 Adjusting film tension for more information on tension. Patriot 12HR - Has pre alignment holes for 9 in. (21 cm) and 12 in. (31 cm) film widths. To increase tension Patriot 25HC - Has pre alignment holes for 9 in.
  • Page 24 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 5-8 © 2002 IBICO...

  • Page 25: Applications

    Patriot 12HR, 25HC, 38HC 6.0 Applications CAUTION: The dull side of the film contains the The Patriot 12HR, 25HC and 38HC will accommodate adhesive. Use extreme caution when loading rolls of film on a 1 in. and 2-1/4 in. cores. This section will delustered (matte) film as both sides appear dull.
  • Page 26 Patriot 12HR, 25HC, 38HC Operations Manual Move the lower idler out of the locked position. If using film not pre-aligned on the supply shaft, align edges of the upper and lower rolls of laminating film with the center of the heat rollers. Secure the rolls of laminating film in place by tightening the thumb screws located on the core adapters.
  • Page 27 Operations Manual Patriot 12HR, 25HC, 38HC Lower the roller pressure handle to close the nip opening. CAUTION: A carrier of some type (board, roll of craft paper or a roll mount adhesive) must be used Tun power toON and press RUN.

  • Page 28: Starting An Application

    Patriot 12HR, 25HC, 38HC Operations Manual 6.2 Starting an application Bottom material; Craft paper – pull the craft paper around the lower idler and adhere it to the adhesive side of the PSA laminate draped in front of the heat rollers.

  • Page 29: Speed And Temperature Guide

    Operations Manual Patriot 12HR, 25HC, 38HC 6.3 Speed and temperature guide Ensure the rear slitter is completely to one side on the laminator. Figure 6.3.1 and Figure 6.3.2 are speed and temperature charts that provide general guidelines for proper heat and speed settings for use on certain materials and laminating film combinations.

  • Page 30: Figure 6.3.1 Chart For Degrees Fahrenheit

    Patriot 12HR, 25HC, 38HC Operations Manual Figure 6.3.1 Chart for degrees Fahrenheit Film Nap-Lam II Nap-Lam I * Vinyl Premium Hi-Tac Stock guage Preset conditions Settings Settings Settings Settings Temp (F) Speed Temp (F) Speed Temp (F) Speed Temp (F)

  • Page 31: Web Diagrams

    Operations Manual Patriot 12HR, 25HC, 38HC 6.4 Web diagrams Mounting (pre-coated board and image) Use the web diagrams to perform various Image applications. Release liner Encapsulation (Poly-in film) Pre-coated board Film Mounting (decal) Image Image Release liner Film Board Encapsulation (Poly-out film)

  • Page 32: Helpful Hints

    Patriot 12HR, 25HC, 38HC Operations Manual 6.5 Helpful hints Single sided thermal lamination (single image) Good consistent lamination is a result of combining proper heat, speed, tension and dwell time. Dwell time is the Film amount of time the material to be laminated is compressed...

  • Page 33: Important Points To Remember

    Operations Manual Patriot 12HR, 25HC, 38HC 6.6 Important points to remember CAUTION: Do not stop the laminator before an item has completely exited the pull rollers. Even a momentary stop will cause a dwell line (heat line) on the laminated item.
  • Page 34 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 6-10 © 2002 IBICO...

  • Page 35: Troubleshooting

    INFORMATION: Improper maintenance can result contact with the rollers can burn you! in poor output quality. IBICO offers Cleaning kits ( P/N 1711515 ) as well as CAUTION: Hardened adhesive deposits on the Extended Maintenance Agreements. rollers can cause damage to the rollers. Rotate the rollers at the lowest speed setting on the control panel.
  • Page 36 Patriot 12HR, 25HC, 38HC Operations Manual 7.3 Troubleshooting WARNING: Never clean the rollers with sharp or As an operator, you can perform some basic pointed objects. troubleshooting before contacting your local service representative. Remove the film from the laminator. Preheat the laminator until the READY indicator illuminates.
  • Page 37 Operations Manual Patriot 12HR, 25HC, 38HC Figure 7.3.1 Troubleshooting guide Symptom Possible cause Corrective action •POWER lamp does Laminator not connected to the Insert attachment plug into receptacle. not illuminate when ON/ OFF electrical supply. isin the ON position. •...
  • Page 38 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 7-4 © 2002 IBICO...
  • Page 39 Operations Manual Patriot 12HR, 25HC, 38HC 8.0 Recommended spares 8.1 Spare parts list for the Patriot 12HR Part # Item Description Quantity Drawing ref. 610010211 Transformer, 120/36/1.3 P12HR-001 706011106 Main PCB P12HR-001 6090202 DC Geared motor P12HR-001 609040201 Fan motor, 80mm...
  • Page 40 Patriot 12HR, 25HC, 38HC Operations Manual 8.2 Spare parts list for the Patriot 25HC Part # Item Description Quantity Drawing ref. 610010211 Transformer, 120/36/1.3 P25HC-001 706011106 Main PCB P25HC-001 6090202 DC Geared motor P25HC-001 609070102 Cross fan motor, 110/60 P25HC-001...
  • Page 41 Operations Manual Patriot 12HR, 25HC, 38HC 8.3 Spare parts list for the Patriot 38HC Part # Item Description Quantity Drawing ref. 610010207 Transformer, 240/35/1.8 P38HC-001 706011106 Main PCB, 230V P38HC-001 6090202 DC Geared motor P38HC-001 609070103 Cross fan motor, (L)
  • Page 42 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 8-4 © 2002 IBICO...
  • Page 43 Contact your local INFORMATION: For illustrations, each machine service representative for service. has its own set of drawings. 9.2 Patriot 12HR, 9.3 Patriot 25HC and 9.4 Patriot 38HC. The parts list is in muneric order. The parts illustration are in assembly order.
  • Page 44 Patriot 12HR, 25HC, 38HC Operations Manual Part # Item Description Machine 601250109 Bottom plate 25HC 601250110 Bottom Plate 38HC 601250111 Side Plate (Left) 38HC 601250112 Rewinder support (Left) 25HC, 38HC 601250113 Rewinder support (Right) 25HC, 38HC 601250114 Outside tension plate...
  • Page 45 Operations Manual Patriot 12HR, 25HC, 38HC Part # Item Description Machine 604036121 Front Cover 38HC 604036124 Blade Rail 38HC 604036125 Roller Cover Cap 38HC 604036126 Front Table 38HC 604036127 Rear Table 38HC 604036128 Rear Cover 38HC 604036129 Roller Cover 38HC 604037021 1 In.
  • Page 46 Patriot 12HR, 25HC, 38HC Operations Manual Part # Item Description Machine 613030540 Auxiliary Gear Support Pin (PL), – 6130452 Auxiliary Gear Bushing HR, 21 mm – 701010103 Ball Bearing 25HC, 38HC 701020203 Thrust Needle Bearing, 1730 25HC, 38HC 701020205 Thrust Needle Bearing, 1226...
  • Page 47 Operations Manual Patriot 12HR, 25HC, 38HC Part # Item Description Machine 704140403 Cord Stopper – 704150101 Bi-Metal Thermostat, 130 deg 12HR, 25HC 704150103 Bi-Metal Thermostat, 140 deg 38HC 705200201 Infrared Sensor – 706011106 Main PCB – 706011107 Display PCB –...
  • Page 48 DIM. AS 4151 Anderson Road, DeForest, WI 53532 TOL. FINISH SHOWN TO BE + 1/64 TITLE : Assembly, Frame + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG : DWG SCALE : + .020 ANGLES + 1D 07/01/02...
  • Page 49 DIM. AS 4151 Anderson Road, DeForest, WI 53532 FINISH TOL. SHOWN TO BE TITLE : + 1/64 Assembly, Bridge + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D 07/01/02...
  • Page 50 4151 Anderson Road, DeForest, WI 53532 TOL. FINISH SHOWN TO BE TITLE : + 1/64 Assembly, Control side + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D 07/02/02...
  • Page 51 4151 Anderson Road, DeForest, WI 53532 DIM. AS TOL. FINISH SHOWN TO BE Friction Panel TITLE : + 1/64 Assembly, Drive side + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D 07/02/02 P12HR-004 XXXX + .005...
  • Page 52 4151 Anderson Road, DeForest, WI 53532 TOL. FINISH SHOWN TO BE TITLE : + 1/64 Assembly, Rollers and heater + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D...
  • Page 53 4151 Anderson Road, DeForest, WI 53532 DIM. AS TOL. FINISH SHOWN TO BE TITLE : + 1/64 Assembly, Drive + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D 07/03/02...
  • Page 54 4151 Anderson Road, DeForest, WI 53532 TOL. FINISH SHOWN TO BE TITLE : + 1/64 Table, safety shield and upper unwind + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG SCALE : DWG : + .020 ANGLES + 1D...
  • Page 55 4151 Anderson Road, DeForest, WI 53532 DIM. AS TOL. FINISH SHOWN TO BE TITLE : + 1/64 Assembly, Lower unwind & rear table + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG : DWG SCALE : + .020 ANGLES + 1D 07/01/02...
  • Page 56 4151 Anderson Road, DeForest, WI 53532 DIM. AS TOL. FINISH SHOWN TO BE TITLE : + 1/64 Assembly, Cabinets and panel + .050 Patriot 12HR + .010 DATE : DRAWN BY : DWG : DWG SCALE : + .020 ANGLES + 1D 07/01/02...
  • Page 57 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604022108 (2) 701110101...

  • Page 58: Transformer

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 601250102 Side Plate (L)

  • Page 59: Infrared Sensor

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (2) 613011011 Eccentric Bushing...

  • Page 60: Roller Spring

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE (2) 601230802 FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR Film Shaft Support Panel MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH...
  • Page 61 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (4) 701090710 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH Spring Ring...
  • Page 62 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (2) 607040503 Pull Roller...
  • Page 63 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE (4) 701090508 FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN Flat tension spring PERMISSION FROM GBC PRO-TECH...

  • Page 64: Circuit Breaker, 15A

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE (1) 601250175 MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (2) 601250173 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR Roller Cover Support MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH...
  • Page 65 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604036114 Blade Rail...
  • Page 66 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604022102 Side Cover (R)
  • Page 67 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (4) 701110105 (1) 613030210...

  • Page 68: Knife Blade

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604022108 (2) 701110101...

  • Page 69: Transformer

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE (1)601250111 FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (1)609070103 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR Side Plate (L) MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN (2)613030540...

  • Page 70: Infrared Sensor

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (2)601310508 Micro Switch Support...

  • Page 71: Roller Spring

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (2) 601230802 Shaft Support Panel...
  • Page 72 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (4) 701090710 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH Spring Ring...

  • Page 73: Pull Roller

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (2) 607040501 Pull Roller...
  • Page 74 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE (4) 701090508 FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN Flat tension spring PERMISSION FROM GBC PRO-TECH...

  • Page 75: Circuit Breaker, 12A

    PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE (1) 601250175 MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (2) 601250173 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR Roller Cover Support MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH...
  • Page 76 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, (1)604036124 COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH Blade Rail (1)604036128...
  • Page 77 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604022102 Side Cover (R)
  • Page 78 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (4) 701110105 Nut M8...
  • Page 79 PROPRIETARY GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCE FOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED, COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM GBC PRO-TECH (1) 604022108 (2) 701110101...
  • Page 80 Patriot 12HR, 25HC, 38HC Operations Manual This page intentionally left blank. Page 9-38 © 2002 IBICO...
  • Page 82 General Binding Corporation One GBC Plaza Northbrook, IL 60062-4195...

This manual is also suitable for:

Patriot 25hcPatriot 38hc

Table of Contents

Save PDF