Page 1
Operator's Manual . M624BITSPS WARNING: READ ENTIRE MANUAL BEFORE ATTEMPTING TO OPERATE MACHINE! If incorrectly used this machine can cause severe injury. Those who use and maintain this machine should be trained in its proper use, warned of its dangers, and should read the entire manual before attempting to set up, operate, adjust, or service this machine.
Page 2
Importan Importan Important Rules for Y t Rules for Y t Rules for Your Safety t Rules for Y our Safety our Safety our Safety Importan Importan t Rules for Y our Safety Before operating this machine read all the instructions for safe operation, as well as, the instructions governing the engine and other components of this machine.
Page 3
Assembly 1. Remove the Mower from the carton by cutting the box on all four corners and rolling it off the box base. 2. Remove owner's manuals and warranty papers. 3. Install upper handles. • Remove 5/16" nut and bolt on lower handle. •...
DO NOT ATTEMPT TO START OR OPERATE THIS MOWER UNTIL YOU ARE COMPLETELY FAMILIAR WITH LOCATION AND USE OF EACH CONTROL NECESSARY TO OPERATE THIS MOWER. YOU MUST KNOW HOW TO STOP THIS MACHINE BEFORE YOU START IT. EACH TIME PRIOR TO STARTING, CHECK THE THROTTLE ASSEMBLY TO INSURE IT IS WORKING PROPERLY.
Starting the engine 1. Read engine owner's manual for complete starting instruction. Do not operate this MOWER without reading the engine owner's manual. 2. Move the throttle control lever forward to the START or FAST position. 3. Push primer bulb firmly 3 times before starting engine. Note: Priming is usually unnecessary when restarting a warm engine.
Limited Warranty Maxim Manufacturing Corporation, through its dealers will repair or replace any part, or parts of the M624BITSPS frame or handles that are defective in material or workmanship or both. Transportation charges on parts submitted for repair or replacement under this Warranty must be borne by purchaser.
Need help?
Do you have a question about the M624BITSPS and is the answer not in the manual?
Questions and answers