Download Print this page

Trouble Shooting; Specifications - Challenge S35U-B Assembly Instructions Manual

3.5l ultrasonic hudmidfier

Advertisement

TROUBLE SHOOTING

Please check the following items before having it repaired:
Problem
Reason
Power lights off
Unit isn't plugged in.
Peculiar smell
New unit.
The water is dirty or has
been in the unit too long.
Exceptional noise
The water level is too
low.
The unit is not level.
14
Solution
Plug in it and turn the
Power Knob.
Open the Water Tank Cap
and keep it in a shady and
cool place for 12 hours.
Change the water.
Fill the Water Tank.
Put the unit on a level
surface.
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH
YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.

SPECIFICATIONS

Technical Data
Model
S35U-B
Voltage
220-240V~/50Hz
Watt
25W
Rating Humidity
at least 220ml/h
Water Tank
3.5L
Recommended Room Size
25m
Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 3A plug complying with BS1363. If this plug is unsuitable
or needs to be replaced, please note the following :
Plug Replacement
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
If in doubt, consult a qualified electrician.
IMPORTANT
This unit is a Class II Appliance.
The wires in this mains lead are coloured as follows:
Blue-Neutral
Brown-Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal, which is marked with N or coloured blue. The wire which is coloured
brown must be connected to the terminal which is marked L or coloured brown.
Always ensure that the plug cord grip is fastened correctly. If a 13A (BS1363)
fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and
be ASTA approved. If in doubt contact a qualified electrician.
2
BLUE
CABLE
(NEUTRAL)
GRIP
BROWN
(LIVE)
15

Hide quick links:

Advertisement

loading