Summary of Contents for VitaSound Audio VitaSound TV PAE-200
Page 1
VitaSound TV ™ Personal Audio Enhancer PAE-200 User Manual...
Page 2
VitaSound TV In the Box AC/DC USB adaptor PAE-200 Headset USB cable PAE-200 Handset Base unit Transmitter 5V 1A Analog (RCA) Ear tips Hanging Neck strap Headset case AV cable (large/regular/small)
Contents Introduction Reset PAE-200 Handset Safety and Operation Instruction Handset and Base Unit auto-connection PAE-200 Handset Identifying Parts Color Pairing PAE-200 Base Unit Indentifying Parts 12-13 Getting Started Technical Specification Base Unit Installation and Operation Application Handset Charging Other Optional Accessories PAE-200 Handset Operation Certification and Compliance Power On...
Introduction Thank you for choosing the VitaSound TV PAE-200 designed by Vitasound Audio Inc. Please register your product at www.vitasound.com. With “Making Life Sound Better”, Vitasound develops and brings to market advanced audio solutions that enhance the quality of life for the boomer generation. Utilizing leading-edge brain science, our patented Neuro-Compensator is a “best-in-class’...
PAE-200 Handset Indentifying Parts Headset port (connect to headset) Hook for neck strap Power button EQ mode button EQ mode indicator (1-4) Power indicator Volume level indicator Volume booster switch Volume adjust buttons Reset button Charging port for Base Unit Left Front Right...
PAE-200 Base Unit Indentifying Parts Power button (transmitting) OPTICAL Power indicator OPTICAL COAXIAL COAXIAL DIGITAL AUDIO IN Charging dock for PAE-200 Handset Analog (RCA) audio-in port Audio input mode switch 18 19 (Optical/Coaxial) Optical audio-in port Coaxial audio-in port USB power adaptor port...
Base Unit Installation and Operation TV set Analog (RCA) audio cable Installation of Base Unit to TV Audio out Connect the Base Unit with one end of the analog (RCA) OPTICAL audio cable OPTICAL COAXIAL COAXIAL DIGITAL AUDIO IN TV back panel Red connector to Red port, White connector to white port Connect the other end of the analog (RCA) audio cable to the analog (RCA) audio-out port of the TV set...
Base Unit Power ON/OFF and Indicator Press the power button until the Red power indicator is ON It is ready to connect to the Handset when the red light is ON To turn off the Base Unit, press and hold the power button until the power indicator is OFF Press Press and Hold...
Power on the Handset Press and hold Press and hold the power button until the Red power indicator is on and flashing. It will search and connect to the Base Unit automatically. The indicator will stop flashing and turn to green color when the Handset is paired to the Base Unit. Adjust Volume Volume adjust button Press and release...
Select EQ Sound Mode EQ mode indicator The PAE-200 is equipped with 4 different EQ sound modes. User can select the sound mode according to the personal preferences EQ mode button EQ mode 1 : overall optimized EQ mode 2 : Low frequency boost EQ mode 3 : Medium frequency boost EQ mode 4 : High frequency boost The corresponding indicator will be lit up after...
Reset the PAE-200 When the PAE-200 Handset cannot be operated in any situation, press the reset button by a small pin object to reset the PAE-200 Handset. Reset button Headset To achieve the best sound performance, please use the headset provided by VitaSound.
Auto-connection between PAE-200 Handset and Base Unit blue trademark If the Handset color of the PAE-200 and the “VitaSound” trademark color on the Base Unit Transmitter are the same, they will be connected automatically within a range of 10 meters. No pairing is required. 10 meters blue color If two Base Units are installed within 5 meters, transmitting signal will be interfered.
Color Pairing and Connection If the Handset color of the PAE-200 and the “VitaSound” trademark color on the Base Unit are not matched, the Handset and Base Unit will not be paired. Please be aware of the PAE-200 Handset color and the “VitaSound”...
Frequently Asked Questions Symptom Possible Cause Possible Corrective Action Page The PAE-200 Handset is off. Turn on the PAE-200 Handset. The PAE-200 Handset is not The PAE-200 Handset is out of battery Charge the PAE-200 Handset immediately. working The PAE-200 Handset is hang off. Press the Reset Button with a small pin object to reset the PAE-200 Handset.
Page 16
Symptom Possible Cause Possible Corrective Action Page When using the coaxial cable to connect the Base Unit and TV set, make sure No sound is produced from the 1) the coaxial cable is connected with the Base Unit and TV set properly headset while the Red indicator No audio signal from the Base Unit or TV 2) the Audio input mode switch on the Base Unit is switched into “...
Technical specification PAE-200 TV Handset Base Unit Transmitter Dimension: 101.5mm x 94.1mm x 40.1mm Dimensions: 100.2mm x 60mm x 19.1mm Wieght: 97 gram Weight: 88 gram Power: 5V 1A (5W) Battery: Built-in rechargeable lithium-ion, 2000 mAh Audio source input: Analog (RCA) Jack (Red/White) Operation time: 6 –...
Smart phone MP3 player Laptop/PC Tablet Wall plug power adaptor USB cable Power adaptor 3.5mm phone jack to RCA cable Analog (RCA) audio cable Optical audio cable Base Unit Transmitter Tv box Charging Tv box HiFi Audio player PAE-200 Handset Disc player HiFi Audio player Disc player...
Optional Accessories 3.5mm Phone Jack Leather Case Neck Strap Clip Case Belt Clip Case Optical Cable Coaxial Cable to RCA Cable Over the Ears In Ear Headset T-coil Neck Loop Hanging Neck Strap Reset Pin Headphone...
FCC statement FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 21
www.vitasound.com info@vitasound.com 1-877-967-0742 PAE-200 Eng Version 1.2...