8
System
8.11.8 Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed.
(Range: 0 – 50 seconds)
A warm-up time that is too short may damage the product due to overvoltage.
8.11.9 Fan and Temperature
Protects the product by detecting the fan speed and internal temperature.
Fan Control
Selects auto or manual for the fan speed settings.
Auto
Manual
Fan Speed Setting
Sets the fan speed within a range of 0 and 100.
Enabled when
Temperature Control
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77 °C by default.
The picture will be dimmed if the temperature exceeds the specified temperature, and the
product will automatically power off to prevent overheating if the temperature keeps rising.
It is best to use the product at temperatures 75 - 80 °C (based on ambient temperature of
40 °C). Refer to "Specifications" herein for details about operating conditions.
8.11.10 Device Name
Select or enter a
Fan Control
is set to Manual.
Device
Name. This name can be show on network remote controls over the network.
157
8 System