Advertisement
Configuring TCP/IP Properties
1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via list.
3. Select Using DHCP Server from the Configure list.
4. Close the TCP/IP Control Panel.
5. Click Save if prompted, to save changes to your configuration.
6. Turn on your Prestige and restart your computer (if prompted).
Verifying TCP/IP Properties
Check your TCP/IP properties in the TCP/IP Control Panel.
Access the Prestige using the command line interface via a telnet session.
1. Launch a Telnet program. In Windows, click Start and then Run.
2. Type "Telnet" followed by a space and the IP address of the Prestige,
(192.168.1.1 is the default) and click OK to display the password screen.
3. Enter "1234", the default password, to access the command line interface main
menu. As you type a password, the screen displays an asterisk " * " for each
character you type.
You can configure two PVCs, node 1 or node 2 by using the following commands. See your User's Guide for detailed
information.
wan node index [1-2]
wan node ispname
wan node vpi <vpi>
wan node vci <vci>
wan node mux <llc|vc>
wan node save
wan node disp
An example is shown next.
Set ting up Yo ur Mac in tos h Co mp ute r
A
c
c
A
c
c
Password: ****
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras>
I
n
I
n
COMMAND
Set a node as the current node to apply node commands.
Identify the ISP used by this node.
Configure the Virtual Path Identifier from 0 to 255
Configure the Virtual Channel Identifier from 32 to 65535.
Configure the multiplexing method used by the Prestige.
Save your current node settings.
Display the settings for the current node.
ras> wan node index 1
ras> wan node vpi 100
ras> wan node vci 32
ras> wan node mux vc
ras> wan node save
e
s
s
i
n
g
t
h
e
P
r
e
s
t
e
s
s
i
n
g
t
h
e
P
r
e
s
t
i
t
i
a
l
C
o
n
f
i
g
u
r
a
t
i
o
i
t
i
a
l
C
o
n
f
i
g
u
r
a
t
i
o
DESCRIPTION
i
g
e
i
g
e
n
n
Advertisement
