FR SERIES USER MANUAL
This cabinet maybe used with valve amplifiers, however a solid state power amplifier is
recommended to achieve its full potential. The matrix GT and GM series amplifiers are a good
choice for powering this cabinet.
With regards to connecting multiple cabinets to the same amplifier, please consult the
amplifier user manual. As a general rule it is not recommended to connect more than two
cabinets in parallel to any one amplifier channel as typically most amplifiers are not designed for
impedances below 4 ohms and are likely to perform poorly or malfunction.
Amplifier Type:
Solid State
Valve
Recommendations serve as a guide, if you are unsure about any of the above then
REV.1.04
2. Recommended Amplification:
Recommended min. power:
500 W @ 4Ω amp rating
At users discretion
consult a qualified technician.
Recommended max. power:
1000W @ 4Ω amp rating
At users discretion
MATRIX AMPLIFICATION
4
Need help?
Do you have a question about the FR 212 and is the answer not in the manual?