Basic Connection - Panasonic Viera TH-P50X30Z Operating Instructions Manual

Plasma tv
Table of Contents

Advertisement

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet
first.
Rear of the TV
AC 220 - 240 V,
50 / 60 Hz
Mains lead (supplied)
Mains Lead
Make sure that
Push until both
the mains lead is
side tabs click
securely fixed.
To remove from the TV:
tabs
Press both tabs and pull on mains
connector to release
Note
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the
correct terminating plug are required.
If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required.
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
VIERA Link connection
Other equipment connection
Read the manual of the external equipment, too.
(p. 56)
(p. 61 - 63, 72)
Satellite dish
Set top box
Fully wired HDMI
compliant cable
Aerial
RF cable
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viera th-p42x30z

Table of Contents