Assembly; Installing Batteries; Adjusting Length; Turn On - WGI Innovations Cyclone MC1 User Manual

Assembly

Remove the plastic bolts on the top of
the coil. Fit the rod inside the bracket on the
coil. Insert the plastic bolts into the bracket and
through the bottom rod. Then tighten but do
not over tighten.
Battery Connectors

Installing Batteries

Open the battery door by undoing the door latch. Place
the 9V batteries in the compartment and attach the connectors
to the batteries. Latch the door closed. Do not use Heavy Duty
batteries or Zinc-Carbon batteries. Do not mix old and new
batteries.

Adjusting Length

Lift the handle latch located on the tube. Extend the
tube to the desired length. Lock the handle latch back into
place to secure.
Door Latch
Handle Latch

Battery Test

until it clicks while the unit is powered ON. The needle
on the Target Indicator should move to BATT OK.

Turn ON

Rotate left knob to click power to the unit

Adjust Sensitivity

Rotate left knob clockwise to increase sensitivity
(Reduce sensitivity if the detector emits false signals; the detector is probably reacting to electromagnetic interference for the soil
To test battery, rotate right knob counter-clockwise