Assembly - WGI Innovations GROUND EFX STORM MX60 User Manual

ASSEMBLY

Assembling the coil unit
1
Unscrew the bracket from the bottom rod.
Fit the bottom rod inside the coil and re-
place the bracket. Then tighten but do not
over tighten. NOTE: The large hole faces
down.
Connect The Rods
2
Connect the Top Rod to the Bottom Rod
by sliding the Top Rod with the Locking
Bracket end down. Note: The groove on the
Top Rod needs to face away from you. Align
grooves to one another to ensure rods stay
in place.
Slide the Top Rod to the desired length and
tighten the Locking Bracket by turning it to
the Left.
7
Connecting the Handle Unit
3
Connect the rods to the Handle Unit by
sliding the Locking Bracket end down.
NOTE: The groove on the rods need to
face away from you. Align grooves to one
another to ensure rods stay in place.
Tighten the Locking Bracket by turning it to
the left.
Connecting the Wiring
4
Take the cord that is connected to the coil and
wrap it around the rods. Continue wrapping
up around the rods and then plug it into the
back of the LCD display.
8