Switching Your Phone On/Off; Setting Up Your Phone For The Firstime; Switching To Sleep Mode - Zte Blade L2 User Manual

the battery like this:
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.

Switching your phone On/Off

Make sure the SIM card is in your device and the bat-
tery is charged.
• Hold the Power key to switch on your phone.
• To switch it off, hold the Power key to get the phone
options. Select Power off, and then tap OK.
Setting up your phone for the first time
When you first power on your phone after you purchase
it or reset it to factory settings (see chapter Sorting out
Your Phone Settings – Privacy: Reset to Factory Set-
tings), you need to do some settings before using it.
Tap the Menu key in the standby mode, then select Sys-
tem settings > Language & input > Language to change
the language you want to use, if needed.

Switching to Sleep Mode

To save battery power, Sleep Mode suspends your
device to a low-power-consumption state while the
display is off. Your device also goes into Sleep Mode by
84
Manual Blade L2