Huawei WA603DE Configuration Manual page 31

WA603DE & WA653DE
Fat AP Configuration Guide
Figure 4-5 Enabling the system log function
Table 4-2
Table 4-2 Description of the log parameters
Parameter
Log Status
Syslog Server Address
Syslog Server Port
2. Select Enable in the Log Status field.
Table 4-3
Table 4-3 Fields in an event log
Parameter
Log time
Device name
Log information
3. Enter the IP address of the system log server and retain the default port setting.
4. Click Update Settings to save the settings.
----End
Issue 02 (2012-04-19)
describes the log parameters.
Description
Enable the system log function, which is enabled by default.
IP address or host name of the system log server. The default
value is 0.0.0.0.
UDP port used by the system log server. The value is 514 or
ranges from 11024 or 65535. The default value is 514.
describes the fields in an event log.
Description
Time when the log is generated.
Device name of the AP.
Content of the log.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4 Upgrade and Maintenance
26