Huawei WA603DE Configuration Manual page 21

WA603DE & WA653DE
Fat AP Configuration Guide
The page shown in
Figure 3-10 Configuring the access control parameters
2. Select an access control mode.
By default, Disable WLAN access restrictions is selected. If you select Allow only stations
listed in the Access Control Table, the page shown in
Figure 3-11 Adding MAC addresses of the STAs
3. Click Add new entry, and add the MAC addresses of the STAs that will connect to the
WLAN.
A maximum of 128 MAC addresses can be added. To delete an MAC address, click Cancel.
4. Click Update Settings to save the settings.
5. Click Go back to Wireless Configuration.
----End
To restrict a STA from connecting to the WLAN, click Deny only stations listed in the
Access Control Table and add the MAC address of the STA to the address table.
Issue 02 (2012-04-19)
Figure 3-10 is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Service Configuration
Figure 3-11 is displayed.
16