FujiFilm FinePix S2 Pro Service Manual page 52

4. Adjustment
<Step 3>
Carry out the following in accordance with the instructions on
the [Download Complete Screen (Fig.38)].
(1) Remove the DC jack from the camera.
(2) Press the [Enter] key on the computer.
--> The "Jig Mode Settings" window (not shown) appears.
<Step 4>
Set the camera to Jig mode as directed by the instructions in
the "Jig Mode Settings" window (not shown) and then press
the [Enter] key on your computer.
--> The [Adjustment Select Screen (Fig.39)] is displayed.
<Step 5>
Check that firmware version displayed in the "Adjustment
Select Screen" window (Fig.39-(1)) is updated.
52
FinePix S2 Pro (U/E) SERVICE MANUAL
<Fig.38> Download Complete Screen Screen
<Fig.39> Adjustment Select Screen
(1)