Features; Installing Active Directory - Toshiba Surveillix IPSe8-X Software Manual

FEATURES

The instructions below are for LDAP with Server Software version 3.6.36 and above.
The recorder server does not need to be joined to the Domain. The recorder server will query the LDAP server for accounts

and authorization levels.
The recorder server creates groups within LDAP for each of the permissions on the recorder. Simply join a Domain user to

these groups to provide access to that function in the recorder.
Recorder access within LDAP is based on the Site Code within the recorder software. This allows an administrator to group

recorders with the same Site Code.
Remote and Multi-Site management software works with LDAP logins.


INSTALLING ACTIVE DIRECTORY

Required Items
Name of LDAP server.

Account in LDAP server that has Domain Admin rights. This user will be used initially to create the OU's and Groups within

LDAP.
1. Verify that the recorder server is connected to a network that has a valid LDAP server.
Ensure that the TCP/IP settings are configured correctly for DNS resolution and gateway if needed.
Check to verify that you can ping the LDAP server without issues.
2. Set up DVR Site Code to be used for LDAP authorization. The default will be 100-000. This site code can be used to group
recorders together within LDAP.
a) Log in to the recorder using the local recorder administrator account (non-Active Directory).
b) Navigate to the Setup -> Information tab and change the Site Code.
3. Log on to the recorder server with the domain account
with administrator privileges (see above required items).
If successful, the recorder will log the administrator user
on without any error messages. You may log off the
recorder once this is completed without errors.
Note If you encounter an error please verify that the above
required items are correct.
32338AC 81