Timer / Alarm - Octopus LRC300 User Manual

TIMER / ALARM

The LRC300 has a timer function which allows the user to program a
time to activate the tuner (e.g. to wake up to). When the programmed
time is reached the remote automatically sends out the Tuner device
code, a special wake-up code and any code programmed into the "1"
button in the tuner device bank. For instance, this allows the remote to
activate an Octopus keypad in that room, select Tuner and preset 1
(which can be set to the preferred radio station). The "1" button can
also contain a Macro if desired (e.g. starting a CD player).
1. The remote needs to be positioned so that it has a clear
line of sight to the Octopus keypad.
OCTOPUS LRC300
2. On the back of the remote press EDIT twice (using a paperclip
or similar), to enter Timer set mode. Display shows "TIMER?"
flashing. Press the
3. Follow the steps below to set the desired values:
5. When finished press the EDIT button or wait 15 seconds
to exit Timer set mode.
Note: The Alarm On/Off button can be used at any time to turn
on or off the timer/alarm without affecting the set time or days.
or buttons to start editing.
MENU TITLE
ENTER
GUIDE EXIT
MENU TITLE
ENTER
GUIDE EXIT
Clear line of sight
up to 4 metres
(12 feet)
Press
buttons to scroll
through characters.
MENU
GUIDE
Press
to move back a character.
Days can be set to
weekdays, weekends
or every day of the week
4. Once the timer has been set
a small alarm clock symbol
appears on the display to
indicate the timer is active.
OCTOPUS WCU310
or
ENTER
to move forward,
TITLE
EXIT
6