Advertisement
DRIVE INSTALLATION
DRIVE INSTALLATION
-
When the Digital voice recorder is
used as movable disk, you can use
the drivers built in the operation
systems such as Windows
Me/2000/XP, Mac OS 9.x/Mac OS
and Linux 2.4.x, etc., and you don't
need to install the driver. Under
Windows 98, you need to install
the driver. AII the driver files are
included in the CD S enclosed.
You can install the driver of the
Digital voice recorder to Windows
98 from CD. The installations
procedures are described as below:
•
Start up your Windows 98 system
•
Insert the CD driver S Into the
CD-ROM Drive.
See fig. 21.
•
Install the driver;
•
Restart the operation system;
•
Insert the music U-disk into the
computer's USB interface. The
system will automatically find the
U-disk, which displayed as
movable disk.
RECORD FROM OTHER DEVICE
1. Plug one end of Audio Cable U
into the External Micophone Socket
B .
See fig. 22.
2. Plug the other end of Audio Cable
U into the other music device.
3. Start record.
14
PC
CD ROM Drive
S
Other Music Device
fig. 22
FORMAT MEMORY
FORMAT MEMORY
-
To format the memory, you
should insert the MP3 into the
computer's USB interface and
enter USB connecting mode to
format the MP3 memory. Under
any operation system, the
method of format is the same as
that for computer hard disks and
floppy disk (namely select the
"movable disk" to format).
WARNING:
•
Never remove batteries, unplug
fig. 21
the USB cable when in use or
during operation or in PC mode
as this can result in damage to the
unit and possible loss of program
files.
U
ADDING THE SOFTWARE
1. Install software before make the
connection. (auto run / click the
file name, it normally should be
setup.exe)
2. Connect to the computer by the
provided USB Cable R .
See fig. 23.
3. List out all the function in simple
way.
PC
R
P
fig. 23
15
Advertisement
