Change Pin Code; Selecting Always On Top Mode; Selecting A Pref Mode - Wetelecom WM-D200 Installation And Connection Manual

5.4. CHANGE PIN CODE

• Click
• Select "RUIM Card"
• Select "Change"
• Enter pin code for Old PIN Code, New PIN Code and Verify
New PIN Code, and then Click
Note:
Entering the wrong PIN codes for 3 times, the RUIM card
will be locked and cannot use it until you have entered
the correct PUK code. The MTS Connect prompts you
each remaining number of attempts for entering the PIN
code or the PUK code.

5.5. SELECTING ALWAYS ON TOP MODE

• Click
• Select "User"
• Select "ON"
.

5.6. SELECTING A PREF MODE

• Click
• Select "User"
• Select "Evdo+1x"
Mode", and then Click
to display the Setting interface.
Tab.
in "PIN Mode".
to display the Setting interface.
Tab.
or "OFF" in "Always On Top",
to display the Setting interface.
Tab.
or "Evdo only"
.
and then Click
or "1x only" in
.
"Pref
26