Download Print this page

Sonuus G2M Owner's Manual

Universal guitar-to-midi converter

Advertisement

Quick Links

G2M™ (Version 2)
Universal Guitar-to-MIDI Converter
Owner's Manual
Congratulations on your purchase of the
G2M™. Please take the time to read
through this manual to ensure you get
the best from your G2M™.
What is the
G2M™
The G2M™ is a simple to use, but highly
effective, Guitar-to-
"Universal" because it doesn't need a
special pick-up mounted on your guitar,
but instead simply connects to your
guitar like any other effects pedal or
tuner. However, this does mean that it
can only work "monophonically", so
chords are not supported.
Designed to give accurate triggering,
with very low latency, it is a true plug-and-
play solution for monophonic
It can be used to sequence bass lines
and guitar solos, add an edge to your live
performances and to open up many
creative possibilities.
?
converter. It is
MIDI
guitar.
MIDI
G2M™
Power
Your G2M™ is powered by a single 9V
PP3 battery (supplied). Simply connect
the
battery
observing
polarity. If you connect it the wrong way
round it won't cause any damage, but
the unit won't operate until this is
connected correctly.
Because of its low power consumption,
the unit will run for many hours (typically
for more than 50) on a single battery.
When the battery is close to needing to
be replaced, the
light. It is not necessary to replace the
battery immediately since the G2M™ will
continue to function normally. When the
battery is nearly exhausted, the
will flash and the battery
BATTERY LED
must be replaced. If you need the G2M™
to work reliably for several hours (
recording session, or when playing live)
the battery should be replaced if the
is lit.
BATTERY LED
The G2M™ is switched on when a lead is
plugged into the
maximise battery life, this jack must be
disconnected when you are not using
the unit.
After 30minutes of inactivity the G2M™
will enter a low-power (but not fully off)
state to preserve the battery. To restart
the unit, simply unplug and re-insert the
lead into the
GUITAR
Operation
Using your G2M™ couldn't be simpler:
• Plug your instrument (electric guitar)
into the
GUITAR
will light.
POWER LED
the
correct
LOW BATTERY LED
e.g.,
jack. So, to
GUITAR
jack.
jack socket. The
G2M™
will
LOW
a
LOW

Advertisement

loading
Need help?

Need help?

Do you have a question about the G2M and is the answer not in the manual?

Questions and answers

Summary of Contents for Sonuus G2M

  • Page 1 LOW BATTERY LED What is the light. It is not necessary to replace the G2M™ battery immediately since the G2M™ will The G2M™ is a simple to use, but highly continue to function normally. When the effective, Guitar-to- converter. It is MIDI battery is nearly exhausted, the “Universal”...
  • Page 2 As you get closer to the pitch-bend to represent ±2 semitones, correct pitch, this pulsing will slow. and the G2M™ is also set to this range. Eventually when you are perfectly in To ensure your sounds are correctly MIDI tune, the pulsing will stop.
  • Page 3: Usage Tips

    • Use new strings. your hands or use it to secure the G2M™ • Ensure there are no fret buzzes, and to your guitar strap. don’t play any percussive sounds such as “slaps”.
  • Page 4: Specifications

    Warranty Specifications The G2M™ is supported by a limited warranty for a period of one year from Power 12mA using 9V PP3 battery the date of purchase. During this period, Auto Sleep (0·1mA) After 30mins of inactivity any faults due to defective materials or...