AbleNet Responsable Quick Start Manual

Quickstart Guide
Responsable Personal Alert System
Establishing a Phone Connection
Telephone Jacks
Learn Mode
Enter Learn Mode
1. Dial any outside line to establish a connection.
– A personal mobile phone number is best. If you
call a friend, tell them to stay on the line while
Responsable is being programmed.
– This step ensures that the device does not
attempt to dial each number as you program it.
2. Move mode switch on Base Unit to Learn position.
3. Enter programming code: 1234 then #.
Inserting Batteries
1. Insert 4 AA batteries into Base Unit as shown on
device.
Distributed by AbleNet
2. Charge unused Pendant battery in front of Base
Unit as shown.
3. Insert battery into Pendant as shown.
www.ablenetinc.com
Programming Friends Numbers
Code Learn
Reset
911 Only
DC 7.5 V
Friends Only
Friends & 911
1. In order of priority, dial friend's telephone number
then press # to accept.
– Include area code, 1 for long distance, or 9 for
2. Repeat for numbers 2, 3, and 4.
– Press # at any time to skip entering additional
3. Exit Learn Mode by moving slider to "Friends Only".
Base Unit
Battery Charger
Pendant
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
0 #
*
outside line as-needed.
numbers. Hang up when complete.
Connecting Telephone Lines & Power
Base Unit
Power Cord
n
Le ar
se t
Co de Re
Ah
0 m
V 50
7. 5
D C
ly
ck s 1 On
e Ja 91 ly
s On
on nd 1
Te le ph Fr ie 91
s &
Fr ie nd
e
n M od
Le ar
Telephone
1. Connect Base Unit to power outlet.
2. Connect Base Unit to telephone wall jack.
3. Connect existing telephone to Base Unit.
Making a Test Call
Blue Button
1. To avoid dialing 911 during the test, move mode
switch on Base Unit to "Friends Only" position.
2. Press and Hold Blue button on Pendant for 2
seconds.
The Base Unit will dial Friend #1. If the call is
answered, use the pendant to speak, holding it like a
traditional phone.
3. Press and Release Gray button on Pendant to hang
up.
Wall Jack