Advertisement
USING A HEADSET
Insert the jack plug on your headset cable into the headset port (14). Your headset is now
ready to use.
To answer an incoming call, press
To end the call, press
ONE TOUCH MEMORY OPERATION
To store a number in one-touch memory
1. Pick up the handset or press
2. Dial the phone number you want to store.
3. Press one of the memory keys (1) to store the phone number under the corresponding
memory number
To make a call from one-touch memory
Pick up the handset or press
the desired number.
FLASH FUNCTION
The RECALL/FLASH time on the Agent 1000 is set to 100ms.
PAUSE
When dialling, press REDIAL/P key (5) to insert a 3.6s pause time between dialled numbers.
RECALL SWITCH
Before you attempt to change the recall switch (13), you should disconnect the phone from
the network.
ADJUSTING HEADSET AND SPEAKERPHONE VOLUME
Slide the VOLUME switch to LO(Low) or MID(Middle) or HI(High) to adjust the headset or
speakerphone volume.
ADJUSTING RINGING VOLUME
Slide the RING switch (12) to HI(High) or LO(Low) to select desired ringing volume.
(6).
(6).
key (6), then press and hold the
key (6), then press the newly programmed memory key to dial
4
*
key for 3 seconds.
STORE
Advertisement
