Advertisement
Quick Links
Advertisement
Summary of Contents for Agent 1000
- Page 1 1000 Instruction Manual...
- Page 2 INTRODUCTION Thank you for purchasing the Agent 1000. This product meets all the CE standards of approval for the UK. Please read this user guide before use. FEATURES 10 one-touch memories Music on hold Last number redial function Pause Ringing volume Low/High...
-
Page 3: Wall Mounting
BUTTONS & FEATURES MEMORY KEYS MESSAGE LED HOLD RECALL REDIAL/P HANDSFREE NUMERICAL KEYS LINE VOLUME (LO/MID/HI) RING (LO/HI) MESSAGE WAITING SWITCH RECALL (TBR/ELR) TELEPHONE HANDSET PORT HEADSET PORT HOLES FOR WALL MOUNTING WALL MOUNTING Position the telephone where you want to fix it to the wall. Drill two holes and fix roundheaded screws, leaving them slightly proud of the surface. - Page 4 INSTALLATION 1. Insert one end of the line cord into the line jack of the phone (8) and connect the other end to your BT socket. 2. Connect the handset cord to the telephone handset port (15). 3. Select the desired volume for calls (11) and your telephone ringer (12). RECEIVING A CALL From the handset 1.
- Page 5 (6), then press the newly programmed memory key to dial the desired number. FLASH FUNCTION The RECALL/FLASH time on the Agent 1000 is set to 100ms. PAUSE When dialling, press REDIAL/P key (5) to insert a 3.6s pause time between dialled numbers.
- Page 6 Will not ring - REN number may exceed 4, for all telephones connected to the line. Disconnect a phone until the number is below 4. If you are still experiencing problems, please contact your Agent supplier. NOTE: Due to continuous product development, all features and specifications are subject to change...