Table of Contents
Advertisement
GENERAL OPERATION
2
1
3
TURNING THE POWER ON........................Any button
Install the front panel and press any button (except REL and
TURNING THE POWER OFF .................................... 1
When system is on, press the POWER button 1 to turn off the unit.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ..............................................2, 3
Press the AUDIO/SET button 3 shortly:
1. Each time you press the AUDIO/SET button 3 shortly, the item changes as follows;
VOL
(Volume)
2. Rotate the VOL dial 2 to adjust the selected item. Make the adjustment within 5 seconds after
selecting. After 5 seconds, the display window will revert to display priority.
BASS (BAS 00)
TREBLE (TRB 00)
BALANCE (BAL L=R)
FADER (FAD F=R)
Press and hold the AUDIO/SET button 3 for several seconds:
Press and hold the AUDIO/SET button 3 for several seconds to enter into the selection for the
situation of beep sound, then rotate the VOL dial 2 clockwise or counter-clockwise to select as
follows:
BEEP 2ND
-
BEEP 2ND mode:
The beep is only generated when all allowed double function button is pressed long (several
seconds).
7
BAS
TRB
(Bass)
(Treble) (Balance) (Fader)
Adjustment Range
BAS –10
TRB –10
10L
10F
BEEP ALL
6
6 10 8
button) when ACC is on.
BAL
FAD
BAS 10
TRB 10
10R
10R
BEEP OFF
5
4
9
Advertisement
Table of Contents
