Setting The Alarms; Snooze Function - Naxa NRC-165 Instruction Manual

Setting the Alarms

1. With the unit in CLOCK mode, press the
VOL+/AL1 to set Alarm 1 (or press VOL−/
AL2 button to set Alarm 2). The ALARM
time will begin to flash on the display.
2. Press the TUN+/HR button to adjust the
hour; press the TUN−/MIN button to ad-
just the minute.
3. When the correct alarm time is set, press
the VOL+/AL1 button (or VOL−/AL2) to
confirm.
4. Press the VOL+/AL1 button (or VOL−/AL2)
to toggle between "wake to buzzer" or
"wake to radio" modes. The current alarm
wake mode is indicated on the display.
Page 6

Snooze Function

1. Whenever the alarm (radio or buzzer) ac-
tivates, it can be temporarily suspended
for 9 minutes by pressing the SNOOZE/
SLEEP button once.
2. The buzzer or radio will then sound again
automatically after 9 minutes.
3. This procedure can be repeated for up to
approximately one hour.
Turning off the Alarm
Press the POWER/AL.OFF button to turn the
alarm off when it sounds.
Naxa Electronics