Harbor Freight Tools Cen-Tech Owner's Manual & Safety Instructions page 2

Safety ......................................................... 2
Specifications ............................................. 6
Assembly .................................................... 6
Canadian Standards Association
Underwriters Laboratories, Inc.
VAc
Volts Alternating Current
A
Amperes
ccA
Cold Cranking Amps
Rc
Reserve Capacity
Ah
Ampere-hours
Page 2
Table of contents
WARNING SyMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
For technical questions, please call 1-888-866-5797.
Operation .................................................... 7
Maintenance .............................................. 11
Warranty .................................................... 12
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved
splash-resistant safety goggles.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Follow connection procedure.
Item 62292