AVS Uriel Systems SCOPE212WIR3 User Manual page 48

Check the "Static IP Address", input the information (IP Address, Subnet Mask, Default Gateway,
②
Web Port, Stream port) you want to change.
Input ID and password.
③
Click the "Change" button. After a while, setup will be completed.
④
Click the "Find" button one more time to check the changed information.
⑤
Dynamic IP
Double click IP address you want to change or check the list on the index and click "Change".
①
Check the "Dynamic IP Address", the IP Address, Subnet Mask, Default Gateway, Web Port, Stream
②
port will be grayed out.
Input ID and password.
③
Click the "Change" button. After a while, setup will be completed. And you can find the changed
④
information.
9.1.3.2 Change IP address for multiple units
<Procedure>
Static IP
Check the index box of two or more units you want to change. Click the "Change" button.
①
The picture of next page will be shown.
[Pic 5-3] Change of IP address
4 8