Page 1
For the latest instruction manual updates and information on the entire Kam range visit: www kam co uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
If any damage is found, do not operate your unit. Please contact the retailer you purchased it from immediately. Please keep the manual and packaging for later reference. Contents 1 x Kam KBA amplifier 1 x instruction manual Safety If there is any damage to the mains cable do not use the device.
Page 3
Connections Connect the output of a pre-amplifier or mixer to the jack inputs. The input signal should be of line level. The maximum output power is obtained when connecting 4 ohm speakers. It is also possible to connect 8 ohm speakers; however, the output power will slightly decrease in this case. The speakers must have a power rating higher than the output of the amplifier.
Page 4
Technical specifications Kam KBA8 power amplifier Output power @ 4 Ohms: 2 x 120w Output power @ 8 Ohms: 2 x 75w Voltage: 115/230V 50/60Hz S/N: ≥95dB Frequency response: 10Hz-20KHz Input sensitivity: 1.228V THD(1KHz/50W): ≤0.1% Protection: Overload / Neutral / Delayed On...