Advertisement
Quick Links
KBA X amp series
Powerful audio amplifiers
M A N U A L
V E R S I O N
1 . 0
0 8 - 2 - 1 2
KBA X500 | KBA X750 | KBA X1000 | KBA X1250 | KBA X1600
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website at www.kam.co.uk
For the latest updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2012. E&OE.
M A D E
I N
C H I N A
Advertisement
Related Manuals for KAM KBA X500
Summary of Contents for KAM KBA X500
- Page 1 For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com Due to continuous product development, specifications and appearance are subject to change.
- Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
- Page 3 Connections Connect the output of a pre-amplifier or mixer to the jack inputs. The input signal should be of line level. The maximum output power is obtained when connecting 4 Ohm speakers. It is also possible to connect 8 Ohm speakers; however, the output power will decrease in this case. The speakers must have a power rating higher than the output of the amplifier.
- Page 4 Technical specification Kam KBA X500 500 watt power amplifier 2 x 250w per channel 2 x 125w RMS @ 4 Ohms 2 x 80w RMS @ 8 Ohms Voltage: 115/230V 50/60Hz / Fuse: AC230V = T2A/250V S/N: ≥95dB / Frequency response: 10Hz-20KHz Input sensitivity: 1.228V / THD(1KHz/50W): ≤0.1%...