D-Link DAP-1150 User Manual page 36

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and
WPA Encryption settings sections are available:
Figure 30. The WPA2 value is selected from the Network Authentication drop-down list.
Parameter
WPA2 Pre-
authentication
IP address
Port
RADIUS encryption key
WPA Encryption
WPA renewal
Click the Next button to continue.
When all the steps of configuring the WLAN are completed, the specified settings are displayed on
the page. Check their correctness and then click the Save button. After that you get to the quick
settings page.
The checkbox activating preliminary authentication (displayed only
for the WPA2 and WPA/WPA2 mixed authentication types.
The IP address of the RADIUS server.
A port of the RADIUS
The password which the access point uses for communication with
the RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
An encryption method: TKIP (available only for the WPA
authentication type), AES (available only for the WPA2 and
WPA/WPA2 mixed authentication types).
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 36 of 175
Configuring Device (Access Point Mode)
Description
server.