Installing The Sunshade Cover; Connecting To The Parrot Bebop Drone - Parrot SKYCONTROLLER User Manual

Installing the sunshade cover

Install the foldable sunshade cover when you use the Parrot Skycontroller with a tablet
in order to protect the screen from light reflection.
The sunshade cover is constituted of:
a lower part (A);
an upper part (B);
a 7-inch tablet support.
1. Unfold the lower part of the sunshade cover.
2. Fix the support or your tablet into the lower part with the elastic bands. If you use a
7-inch tablet, insert it into the tablet support.
3. Fix your sunshade cover on the Parrot Skycontroller.
4. Unfold and assemble the upper part to the sunshade cover.
Note: You can use the foldable sunshade cover without the Parrot Skycontroller.

Connecting to the Parrot Bebop Drone

The Parrot Skycontroller automatically connects to the Parrot Bebop Drone it is sold
with.
Switch the Parrot Bebop Drone and the Parrot Skycontroller on.
> A signal tone indicates that the Parrot Bebop Drone is connected to the Parrot
Skycontroller. The Parrot Bebop Drone battery leds and the Wi-Fi leds light up. The
Parrot Bebop Drone is ready to be piloted with the Parrot Skycontroller.
If you have bought the Parrot Skycontroller and the Parrot Bebop Drone separately,
connect them manually:
Before starting 7