Before Starting; Charging The Battery; Installing The Battery - Parrot SKYCONTROLLER User Manual

Before starting

Note: For easy reading, iPhone®, iPad® and other compatible telephones or tablets are
referred to as 'smartphones' in the manual.

Charging the battery

1. Insert the plug converter corresponding to your country to the
transformer.
2. Plug the battery to the charger.
3. Plug the charger to the mains.
> The charger's led lights up in red when charging. Once the battery
is fully charged, the led turns green. The battery takes about 1 hour
to charge.

Installing the battery

1. Connect the battery to the Parrot Skycontroller power cable.
2. Insert the battery into the battery compartment.
4 Before starting