[Password]/[Retype password]
Enter the password.
•
Available number of characters: 4 - 16 characters
•
Unavailable characters: " &
•
Default: None (blank)
[Remove]
When an SD memory card with a configured password is inserted, the password can be removed using the
[Remove] button.
[Password]
Enter the password.
•
Available number of characters: 4 - 16 characters
•
Unavailable characters: " &
[Change]
When an SD memory card with a configured password is inserted, the password can be changed using the
[Change] button.
[Old password]/[New password]/[Retype new password]
Enter the password.
•
Available number of characters: 4 - 16 characters
•
Unavailable characters: " &
[Status]
Display the configuration status of the password lock.
•
Lock: A password is configured on the SD memory card, and the lock function is enabled.
•
Unlock: The lock function is disabled.
Also display the password configuration status of SD memory card 1 and SD memory card 2 respectively.
•
Password is set.: The password is configured correctly.
•
Error(Unsupported SD memory card): A card that does not support password lock is inserted. Check
that an SDHC memory card or SDXC memory card is inserted.
•
Error(Password mismatch): The SD memory card cannot be used because the password configured for
the SD memory card and the password configured for the camera do not match. Check that the passwords
are correct.
•
Error(Undefined error): Displays when the SD memory card is formatting, locked (write-protected), or
when an error occurs in the SD memory card. Check the SD memory card.
10 Configure the basic settings of the camera [Basic]
Operating Instructions
55