Panasonic WV-SPW631L Operating Instructions Manual page 18

2 Monitor images on a cellular phone/mobile terminal
1.
Access to "http://IP address/mobile"
cellular phone.
→
Images from the camera will be displayed.
Refresh control
Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.
Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.
When the dial key "5" or the [Manual Refresh] button is pressed again, the refresh mode of the camera
will return to manual refresh.
IMPORTANT
•
Transmission will be periodically performed when "Auto Refresh" is selected for the camera
image. Confirm the contract plan of the cellular phone in use before using this function.
•
Depending on the cellular phone in use, "Auto Refresh" may be unavailable.
Resolution control
Changes the image capture size by pressing the dial key "0".
•
Image in the aspect ratio of "4:3": Changes the image capture size between 320x240 (default) and
640x480.
•
Image in the aspect ratio of "16:9": Changes the image capture size between 320x180 (default)
and 640x360.
Image quality control
It is possible to change the image quality between "Quality1" and "Quality2". (®page 88)
AUX control
Controls the AUX terminal.
These buttons will be displayed only when "AUX output" is selected for "Terminal 3" on the setup menu.
(®page 125)
18 Operating Instructions
or "http://Host name registered in the DDNS server/mobile" using a
*1
WV-SPW631L
*2
A
B
C
D