Table of Contents
Advertisement
Configuration
The easiest way to configure the device is using the Web Manager.
The easiest way to configure the device is using the Web Manager. Please do the following steps:
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
address from the router. Connect the Ethernet ports and wait a moment until your computer has received the paramete
. Connect the Ethernet ports and wait a moment until your computer has received the parameters
. Connect the Ethernet ports and wait a moment until your computer has received the paramete
(IP address, subnet mask, default gateway, DNS server).
(IP address, subnet mask, default gateway, DNS server).
2. Open a web browser such as Internet Explorer or Firefox. In the web
2. Open a web browser such as Internet Explorer or Firefox. In the web browsers address field, enter the default IP address
of the NetModule Wireless Router (i.e. http://192.168.1.1); the initial screen appears.
3. Follow the instructions and use the Web Manager to configure the device.
Further Help for Configuration
Further Help for
User manual:
sales@netmodule.com
www.netmodule.com
(i.e. http://192.168.1.1); the initial screen appears.
Web Manager to configure the device.
ser manual:
http://www.netmodule.com/downloads
the following steps:
address field, enter the default IP address
Quick Start Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the NB2700 and is the answer not in the manual?
Questions and answers