Installation; Led Indicators; Dip Switch Configuration Table - VDigi VD-Z3 User Manual

VDigi Electronics

2.1 Installation

1. VGA 15Male to 15Male cable is used to connect your PC Display card to the VD-Z3 VGA In (Optional).
2. For factory default settings, VD-Z3 is ready for XBOX console.

2.1.1 LED Indicators:

Power / VGA ByPass
LED (Orange)
OFF
ON
ON
• Orange LED light up, indicate that the power is available and the VD-Z3 is
turned on, and the input source is from the VGA IN.
• Both Orange LED and Blue LED light up, indicate that the input source is from
Component In.

2.1.2 DIP switch configuration table:

1
VDigi VD-Z3 Component -> VGA Transcoder
Component In / YPrPb
LED (BLUE)
OFF
OFF
ON
2 3
Status Description
Source from VGA In
Source from Component In
4 5
No power
6
Page
11