Chapter 3: Troubleshooting; Troubleshooting - VDigi VD-Z3 User Manual

VDigi Electronics

CHAPTER 3: Troubleshooting

This chapter provides some troubleshooting guidelines for most of the problems you
may encounter with your VD-Z3 either during installation or normal use.

3.1 Troubleshooting

Q1: No picture show in XBOX, GAMECUBE / PS2 when I hooked up the VD-Z3
Component -> VGA Box?
1.1 Make sure the component cable, power supply and Monitor cable are connected
properly. The component cable Green, Red, Blue connectors should be connect to
the corresponding colour of the RCA jack of VD-Z3. Also, ensure the input source
switch is in the YPrPb position and the "Blue" LED should indicate on.
1.2 For XBOX users, you should have 480p enable under the Video Option in XBOX
dashboard. Make sure the game disc is inserted in the XBOX, and please check
the DIP switch setting, the default for XBOX is:
1
OFF
1.3 For GAMECUBE / PS2 users, please check the games is 480p compatible and a
game discs is inserted, also please check the DIP switch setting, the default for
GAMECUBE / PS2 is:
1
OFF
VDigi VD-Z3 Component -> VGA Transcoder
2 3
ON OFF
2 3
ON ON
4 5
OFF ON
4 5
OFF OFF
6
OFF
6
OFF
Page
16