Installation
Installation of lower and upper ventilation
grilles LS300.
LS300
L500
H
LS300
L500
ventilation aperture
Ø min 40 mm
The bottom of the upper ventilation grille must
be equal to or above the height of the refrige-
rator.
Correct mounting of the lower ventilation gril-
le facilitates access to the connections and
functional parts during maintenance.
CAUTION!
An installation other than described will
reduce the cooling capacity and jeopardi-
se the manufacturer's warranty/product
liability.
4.3 Installing the ventilation system
4.3.1 Installation LS300 or L500 (NZ)
To install the ventilation grilles cut two rectan-
gles to suit in the outer wall of the vehicle (for
position of the cuts, see Fig. 13).
1
Cut two rectangles in the
exterior wall of the vehi-
cle.
2
Seal the mounting frame
making it waterproof
( does not apply for
mounting frames with
integral seal) and screw
into position.
3
Insert ventilation grille.
Fig. 11
4
Install locking slider.
5
Lock ventilation grille.
12
b
a
Fig. 12
14 x
Fig. 12
Fig. 14
Fig. 15
Fig. 16